Flat End Trailer Spring Features:

1. Flat End Trailer springs with a closed eye on one end and a flat end on the other. 

    Each spring includes a bushing inside of the closed eye.

2. Multi Flat End Trailer springs are constructed to slide the flat end into your hanger on top of the bolt.

3. The springs are constructed with heavy duty spring steel.

4. This leaf spring has two leaves that extend to the end of the spring.

Attention: Please verify that your hanger has enough clearance for the two leaves before ordering.

Different Capacity Lgiht Duty Flat End Trailer Spring As Bellow:

The flat end trailer spring does the following functions:

> Support the chassis weight.

> Controls rear end wrap-up.

> Controls lateral forces much the same way a hard bar does.

> Controls braking forces.

> Regulates wheelbase lengths (rear steers) under acceleration and braking.

Our leaf spring factory was found in 2002. We have 4 branch plants, 12 production lines and 1 internation 

internation marketing cetenter with an annual   200,000tons. We have passed ISO/TS16949  certificate in 2006.

We engage in the production of all kinds of automobile leaf spring. From small pick-up vehicles to heavy 

duty trucks, from conventional to parabolic, from OEM to after marekt. Thickness from 6mm to 50mm, Width from 

44.5mm to 125mm. Popular material grade incleudes SUP7,SUP9,SUP11A.Usually lead-time is with 1 ~ 2 weeks 

for common leaf spring; 4 ~ 5 weeks  for parabolic leaf spring.Meanwhile, we also supply flat bar for leaf spring 

and flat bar cutting service.

Export Manager: Sunny Yang                            Mobile: (+)86 138 6049 3379  

Tel: (+)86 592 5618 109                                    E-mail: wondee@wondee.com

What'app: (+)86 138 6049 3379                        Website : www.wondeeauto.com